GEMINI SALES INC.

JK LIGHT MOUNTS

JK 2007-UP LIGHT MOUNTING
Fits 2007 to Current JK Wrangler, Rubicon and Unlimited
2 and 4-door models
Textured black
Heavy-duty steel
Mounts to the lower windshield mount using existing mounting holes
No drilling required for installation
Sold as a pair
CAD$89.95
CAD$99.95
Rough Country's unique Lower Windshield Mounts place your 4-inch Round LED Lights or 2-inch CREE Square LED Lights flared out between your Wrangler's windshield and hood. This classic-looking setup gives your Jeep a commanding presence and military Jeep feel. These durable mounting brackets are easy to install and ready to withstand the harshest of elements. Fits any aftermarket lights with a 5/16-inch or 8mm post!
CAD$39.49
CAD$44.95


Rough Country's JK Lower Windshield Mounts offer a primo mounting point and stylish, good looks! This Billet Aluminum mount is perfect for our 2-inch CREE Square LED Lights or any off-road light with a standard-sized post. This mount kit easily bolts near the bottom of the windshield giving your Jeep a commanding presence and military Jeep feel. Made of 6061-T6 Aluminum, these eye-catching mounts are corrosion resistant and ready to withstand the elements. Each mount features a laser-cut "RC" go and is backed by our Lifetime Replacement Warranty.
Made of 6061-T6 Aluminum
Features a laser-cut "RC" logo
Fits 2in Cree LED Square Light Kit (70903) VIEW HERE


Fits 4in LED Round Light Kit (70804) VIEW HERE


Compatible with other aftermarket lights with a 5/16-inch or 8mm post.
LIGHTS NOT INCLUDED.
CAD$124.95
CAD$149.95

With durable steel construction and aggressive good looks, Rough Country's 50-inch LED Upper Windshield Light Bar Bracket is the ultimate solution for adding our premiere lighting system to your Jeep JK. With its modern, stylistic design and superior strength, this upper windshield mount holds your 50-inch Light Bar between the top of your Wrangler's windshield and roof, spanning the entire width of the roof and giving a killer look. Fits any standard 50-inch Off-Road LED Light..

  • Fits 50-inch LED Light Bar Kit (70050-1)
  • Compatible with other aftermarket lights with a 5/16-inch or 8mm post
CAD$134.95
CAD$149.95
Stainless brackets mount directly to the windshield hinge of your 2007-2012 Wrangler. Allows for easy mounting of auxiliary lighting. Uses factory mounting holes for ease of installation-no drilling required. Each bracket is custom designed for an exact mount and include rubber gasket to protect the paint during installation/removal.Uses your existing Screws.Sold in PAIRS.
CAD$39.95
CAD$52.95
Black Powdercoated brackets mount directly to the windshield hinge of your 2007-2012 Wrangler. Allows for easy mounting of auxiliary lighting. Uses factory mounting holes for ease of installation-no drilling required. Each bracket is custom designed for an exact mount and include rubber gasket to protect the paint during installation/removal.Uses your existing Screws.Sold in PAIRS.Lights not included.
CAD$32.95
CAD$39.95

2007-2015 Jeep Wrangler JK & Unlimited JK
Rugged Ridge Windshield Frame Light Bar, Textured Black
The Ultimate Light Bar for your Wrangler! This exciting new design has been created to give the durable look of a five tab light bar with features found nowhere else. Through extensive testing, this heavy duty light bar incorporates a special wind deflector below the light bar to dramatically reduce whistling and “buffeting” of your soft top. Each bar hugs the contour of your windshield providing a great look while not interfering with the use of your hard or soft top. Oversized 2” textured black tubing attaches to your windshield mounts with no drilling.  Each light bar has been specially developed to work with Rugged Ridge Light mount brackets and/or Rugged Ridge mirror relocation brackets. Special three piece design makes the packaging small for ease of shipping. This is truly the most advanced light bar on the market..LIGHTS NOT INCLUDED.

CAD$329.95
CAD$349.95
Off Road Light Mounting Brackets To Windshield Brackets.Includes A Bracket And Grommet To Isolate The Antenna.JK Jeeps 2007-2012.
CAD$39.95
CAD$49.95
Fog Light Extension Kit For Customers Who Replaced Stock Front Bumper With Aftermarket and Mounts Are In Different Location.
CAD$34.95
CAD$39.95
Fits 2.25" to 3" Round Bars 
Description:
The X-Clamp from Rugged Ridge features Pivotal Fit Technology, an innovative and unique adjustment which allows perfect fit mounting to tubes ranging from 2.25" to 3". No gaps, no gaskets! Rotate the X-Clamp to fit your tube, pivot the mounting bracket to the desired position, and then apply the logo to the front.
Product Details:
Black finish 
Fits 2.25" to 3" mounting tubes / bars 
SOLD EACH


CAD$32.95
CAD$36.95
Fits 2.25" to 3" Round Bars 
The X-Clamp from Rugged Ridge features Pivotal Fit Technology, an innovative and unique adjustment which allows perfect fit mounting to tubes ranging from 2.25" to 3". No gaps, no gaskets! Rotate the X-Clamp to fit your tube, pivot the mounting bracket to the desired position, and then apply the logo to the front.
Product Details:
Silver  finish 
Fits 2.25" to 3" mounting tubes / bars 
SOLD EACH
CAD$32.95
CAD$36.95
Finally, the perfect mounting point for off-road action! Rough Country's new Hawse Fairlead LED Light Bar Bracket is the perfect mounting solution for affixing your 12-inch Dual-row LED Light Bar to any standard sized winch hawse fairlead.
This mounting point centers your LED in front of your winch's solenoid box, giving your vehicle a more rugged, industrial profile. Also, by adding a mounting point centered and low to the ground, you give your vehicle an incredible opportunity for lluminating approach angles or providing practical lighting in recovery situations.Our durable, 12-inch Fairlead Mount is made of 3/16-inch plate steel, powder coated flat black. This 100% bolt-on mount makes it easy to install in a flash and is covered for life with Rough Country's Lifetime Guarantee.
Download Instructions  Install Time: 30minutes Average estimated install time peformed by a professional shop or mechanic.
Easy bolt-on install
Perfect for illuminating recovery situations
Made from durable 3/16-inch plate steel
Does NOT fit roller fairleads - please use part# 70128.
ONLY fits 12-inch dual row led light bars.
Does NOT fit single row led light bars.
LIGHT NOT INCLUDED.
CAD$28.95
CAD$34.95

.
Finally, the perfect mounting point for off-road action! Rough Country's new Roller Fairlead LED Light Bar Bracket is the perfect mounting solution for affixing your 12-inch Dual-row LED Light Bar to any standard sized winch roller fairlead.
This mounting point centers your LED in front of your winch's solenoid box, giving your vehicle a more rugged, industrial profile. Also, by adding a mounting point centered and low to the ground, you give your vehicle an incredible opportunity illuminating approach angles or providing practical lighting in recovery situations.
Our durable, 12-inch Fairlead Mount is made of 3/16-inch plate steel, powder coated flat black. This 100% bolt-on mount makes it easy to install in a flash and is covered for life with Rough Country's Lifetime Guarantee.
Download Instructions  Install Time: 30minutes Average estimated install time peformed by a professional shop or mechanic.
Easy bolt-on install
Perfect for illuminating recovery situations
Made from durable 3/16-inch plate steel
Does NOT hawse fairleads - .
ONLY fits 12-inch dual row led light bars.
Does NOT fit single row led light bars
CAD$29.95
CAD$34.95
Rough Country's 20-inch LED Hood Mount makes it easy to add extra off-road lighting and the aggressive good looks that go with it. Easily attach our 20-inch LED Light Bar to your Jeep JK with no cutting or drilling required! This durable, bolt-on light mount attaches to your Jeep's hood using the existing hood hinge mounting point.
Compatible with 20-inch Single-Row LED light bars ONLY
Compatible with other 20-inch aftermarket lights with a 5/16-inch or 8mm post
CAD$34.95
CAD$49.95
Upgrade your JK or XJ front bumper with Rough Country's Bumper Hoop Mounting Brackets for Rough Country 20-inch LED Light Bars! Quickly and easily run our 20-inch Dual-Row or Single-Row LED Light Bars on our Bumper Hoop Attachment (#1056) with this durable, new mounting bracket kit! If you've been wanting to upgrade your halogen lights or desire a uniform LED bar-light look, now's your chance! 
Fits both Single-Row and Dual-Row LED Light Bars
Designed to work with light bars measuring 22-3/16-inches from mounting point to mounting point
Compatible with Rough Country 20in Dual-Row LED Light Bar Kits (#70920 / #73920)
Compatible with Rough Country 20in Single-Row LED Light Bar Kits (#70720)
Compatible with Rough Country JK Stubby Winch Bumper Light Bar (#1056).HERE http://www.geminisales.com/CHEROKEE_FRONT_BUMPERS-Front_Winch_Bumper_Light_Mount_Cherokee_84-01.html
Compatible with Rough Country XJ Winch Bumper Light Bar (#1056).
LIGHTS NOT INCLUDED
CAD$33.95
CAD$39.95
Showing: 15 products
Powered by Fortune3