Things You Will Need
If you want a CB radio in your TJ consider this Rugged Ridge black CB radio dash mount. This kit gives a easy to reach location on the dash for the radio but does not interfere with your vision. The kit includes a microphone mounting plate so that, while driving, the microphone will not obstruct your ability to keep two hands on the wheel.
 These mounting plates install quickly and easily with out having to drill into your TJ; simply replace two dash screws with the longer screws provided and you're done. You can now mount your CB radio.
 The mounts can be installed onto 1997-2006 TJ Wrangler models but no aftermarket roll cage can be equipped as it prevents these mounts from being installed.
Easy Mount For Your Antenna On Your Stock TJ Bumper.
Simply Undo The Screws Holding The End Cap (Either Side),Stick Screw And Screwdriver Through The Two Holes Provided and Secure Them On.That's IT.Mount Only...No Antenna Or Wiring Kit Included.
These cable assemblies are made from our top-quality RG-58A/U, Fire-Flex coaxial cable. They are to be used on any single antenna installation. This includes CB, scanner, 2-meter, and 10 meter. Main features of our Fire-Flex coax are:
*Stranded center conductor to maximize flexibility and prevent untimely breakage.
*Shielding coverage that averages 95% to protect against RF leaks and interferrence.
*Polyvinyl center insulation for ruggedness and longivity.
*Performance that exceeds mil-spec requirements for 50 ohm RG-58A/U coax.
Just Attach Your CB On One End,Mount the Kit To Your Mount,And Screw In Your Antenna.19 Foot Cable Suitable or Most Vehicles.Instructions Included.
Are you looking to install a CB radio in your Jeep® JK Wrangler in an accessible area? The Rugged Ridge® CB radio mount offers you this easy to install solution. The CB radio mount conveniently over the rear view mirror for an easy reach. Made from durable black powder coated steel, now your CB is attached high and within reach without having to take your eyes off the road or trail. 
Minor drilling required for 2007-2010 JK Wrangler 
No drilling required for 2011-Current JK Wrangler
Fender Mount For CB Antenna.Stainless Steel.
Shipping Charges will be deducted if ordered with something larger.


Easily and quickly install your CB antenna to your Jeep  2007-And Newer JK with the new spare tire carrier antenna mount. This durable mounting bracket installs directly to the factory tire carrier without drilling. Each powdercoated textured black steel bracket is extremely durable and provides a hidden mounting point for your CB off road antenna or off road flag. Each antenna mount includes mounting hardware and bracket.
Durable steel construction
Textured black powdercoat finish
Easy bolt-on installation
Mounts to OE spare tire carrier location without drilling
Includes hardware


If you are looking for a side mount with some style, than this is the set up for you. This kit includes the molded side mount and 18 ft (5.5m) of professional grade Fire-Flex coaxial cable. Mount includes rubber gasket and steel backer-plate. Save money by purchasing the mount and the coax in one package! When installed, the coax connectors are concealed on the inside of the vehicle (requires one 13/32" (10mm) and one 13/64" (5mm) mounting hole). The actual mounting surface is approximately 3.125" (79mm) x 1.675" (43mm). Outward protrusion is about 1.875" (48mm)  Each mini-kit contains a FREE microphone hanger

Includes 4 foot Firestick Black Antenna.Stainless Steel Hood Mount Bracket.18 Foot Cable and Connectors.Brackets require drilling.Hood Mount gets better reception and transmit as the whole front of the Jeep serves as a ground plane..Ready to attach your CB Radio.Drilling Required

Connect Meter between CB Radio and Antenna to make sure your installation is correct.Checks to see if you are getting full power to the antenna for best transmit and receive and proper grounding.Instructions Included.


Cable That Would Be Required To Connect SWR Meter To CB Radio



Install under the Hood,Connect to your CB Radio,Press the Push-To-Talk and you have a Loud Speaker.Can Be turned on and off.Great for Rallys and Events as a PA(Public Address System).


Mount on your Dash.Connect to CB Radio for better Audio Quality.Dimensions: 2 3/4" High,4 1/2" Wide,2 1/4" Deep.


Mount on your Dash.Connect to CB Radio for better Audio Quality.Dimensions: 3 3/4" High,3 3/4" Wide,2 1/4" Deep.

Includes 4 foot Firestick Black Antenna.Black Powder Coated NO DRILL Antenna Mount.18 Foot Cable and Connectors.Just remove the two screws that hold the end caps,remove the caps on mount,screw down the mount and attach the rest of the kit.Clears Hardtop rear door.Works with rear Taillight guards..Ready to attach your CB Radio.
Showing: 14 products
Powered by Fortune3